Enamels

Andrew's Matt Enamel

Product Code: DE010

Alkyd resin based matt finishing providing hard wearing flat finish to wood, concrete and steel.

General Information
Type
Single Pack
Colors
As per shade card plus color on request
Finish
Smooth, Matt Finish
Pack Sizes
0.91, 3.64, 20 Liter
Physical Properties
Solid Content
55 ± 5%
Specific Gravity
1.30 ± 0.05 depending on color
Viscosity
100 seconds minimum @ ford cup B4
Flash Point
32°C
Heat Resistant
up to 120°C
Film Thickness
Dry Film Thickness
30 ± 5 microns
Application Data
Application Method
Brush, Roller or Spray
Coverage
120-140 square feet/liter/coat
Surface Dry
5-6 hours @ 30°C
Recoat Time
12 hours @ 30°C

Important: Spreading rates are calculated and due allowance for loss and wastage should be made. Storage stability is one year when stored properly in original sealed container at 15-35°C. The data is subject to change without notice. Since Andrew Paints does not control the application of its products, nor the condition of the surfaces to which they are applied, a limited warranty is provided.

Need technical support or have questions?

Our team is ready to help with application guidance, product recommendations, and technical specifications.

Built with v0