Enamels

Andrew's Hi Gloss Synthetic Enamel

Product Code: DE012

Alkyd resin based glossy finishing coat for wood, concrete and steel. Provides good opacity in bright clean colors with good gloss retention.

General Information
Type
Single Pack
Colors
As per shade card plus color on request
Finish
Smooth, Glossy Finish
Pack Sizes
0.91, 3.64, 20 Liter
Physical Properties
Solid Content
40 ± 5%
Specific Gravity
0.90-1.10 depending on color
Viscosity
100 seconds minimum @ ford cup B4
Flash Point
34°C
Heat Resistant
up to 120°C
Film Thickness
Dry Film Thickness
30 ± 5 microns
Application Data
Application Method
Brush, Roller or Spray
Coverage
120-140 square feet/liter/coat
Surface Dry
5-6 hours @ 30°C
Recoat Time
12 hours @ 30°C

Important: Spreading rates are calculated and due allowance for loss and wastage should be made. Storage stability is one year when stored properly in original sealed container at 15-35°C. The data is subject to change without notice. Since Andrew Paints does not control the application of its products, nor the condition of the surfaces to which they are applied, a limited warranty is provided.

Need technical support or have questions?

Our team is ready to help with application guidance, product recommendations, and technical specifications.

Built with v0